挑選廣告即可獲得 30 PL點 (每日限量5次)
新會員首次完成一輪每日活動再得
1500 PL點
PayLeak
「公司開出的薪資是基於內部標準還是基於市場標準 ?」
PayLeak秉持
「真實、無名、純粹」
只提供「高可信度薪資情報」以及「直接而寫實的評價」
查詢企業職位薪資
金鎧實業股份有限公司薪資行情分析:產品與工程職位的薪資概況
近年來,求職者對於潛在雇主的薪資水平日益關注。本文針對金鎧實業股份有限公司(統一編號53990121)的薪資資訊進行分析,旨在為正在考慮加入該公司的求職者提供參考。請注意,本文資料來自於使用者提供的實際薪資紀錄,涵蓋不同職位與時間區間,並非單一職缺的數據。
從現有資料來看,金鎧實業股份有限公司出現頻率較高的職位包含產品設計師及工程師等。其中,產品設計師的月薪大致落在新台幣三萬元至四萬元之間;而工程師的薪資則略高,多數集中在四萬五千元至六萬元之間。然而,這些數字僅為概略範圍,實際薪資可能因個人經驗、技能水平以及具體工作內容而有所差異。
觀察資料顯示,部分薪資紀錄集中於2017年8月至9月,這表示目前可取得的資料相對有限,且時間跨度較短。因此,在解讀這些數據時,建議求職者需留意其時效性,並考慮將其視為初步參考依據。若希望獲得更全面的薪資資訊,建議可進一步搜尋其他時間點的資料或參考其他管道的資訊來源。
本文的薪資資料來源為會員填報後通過PayLeak人工徵信(標準提供)或由會員自行填報而未經徵信(簡易提供)。這兩種資料在可信度上可能存在差異,因此讀者應以中立的態度看待。此外,文章中提及的「讚」、「踩」以及「信任度」與「懷疑度」等指標僅為描述性參考,不應將其視為客觀的數據進行數值化或排序。
總而言之,金鎧實業股份有限公司的產品設計與工程職位薪資水平在業界具有一定的競爭力。然而,由於資料時效性與來源的限制,建議求職者在評估自身薪資期望時,應綜合考量個人條件、職務內容以及市場行情等因素,並以此作為參考依據。
Jin Kai Industrial Co., Ltd. Salary Analysis: Overview of Salaries for Product and Engineering Positions
In recent years, job seekers have been increasingly focused on the salary levels of potential employers. This article analyzes the salary information for Jin Kai Industrial Co., Ltd. (Unified Business Number 53990121) to provide a reference for job seekers considering joining the company. Please note that the data in this article is derived from actual salary records provided by users, covering various positions and time periods, and is not data for a single vacancy.
Based on the available data, frequently occurring positions at Jin Kai Industrial Co., Ltd. include Product Designers and Engineers. The monthly salary for Product Designers generally falls between NT$30,000 and NT$40,000; while the salaries for Engineers are slightly higher, mostly concentrating between NT$45,000 and NT$60,000. However, these figures are only approximate ranges, and actual salaries may vary depending on individual experience, skill level, and specific job duties.
Observation of the data shows that some salary records are concentrated between August and September 2017, indicating that the currently available data is relatively limited and the time span is short. Therefore, when interpreting this data, job seekers are advised to pay attention to its timeliness and consider it as a preliminary reference. If you wish to obtain more comprehensive salary information, it is recommended to search for data from other time points or consult information sources through other channels.
The source of the salary data in this article is either manual verification through PayLeak after membership submission (standard provision) or self-reported data without verification (simple provision). These two types of data may differ in credibility, so readers should view them with a neutral attitude. Furthermore, indicators mentioned in the article, such as "likes," "dislikes," "trust level," and "doubt level," are merely descriptive references and should not be viewed as objective data for quantification or ranking.
In summary, the salary levels for Product Design and Engineering positions at Jin Kai Industrial Co., Ltd. are competitive within the industry. However, due to limitations in data timeliness and source, job seekers are advised that when evaluating their salary expectations, they should comprehensively consider personal qualifications, job content, and market conditions, using this information as a reference.
| # | 職位名稱 | 起迄時間 | 月薪 |
|---|
| 1 |
產品設計師 |
2017-08 ~ 2017-09 |
|