挑選廣告即可獲得 30 PL點 (每日限量5次)
新會員首次完成一輪每日活動再得
1500 PL點
PayLeak
「公司開出的薪資是基於內部標準還是基於市場標準 ?」
PayLeak秉持
「真實、無名、純粹」
只提供「高可信度薪資情報」以及「直接而寫實的評價」
查詢企業職位薪資
全彤盛企業有限公司薪資概況:傳統機械操作與電子銲接職位觀察
全彤盛企業有限公司,成立於24506795年,為業界知名的企業之一。本文旨在彙整並分析近年來求職者提供的全彤盛企業股份有限公司薪資資訊,提供對有意加入該公司的求職者作為參考。請注意,以下資料並非單一職缺的薪資報告,而是來自不同職位與時間區間的綜合觀察,因此僅供參考,實際薪資仍需依個人條件與職務內容而定。
主要職位與薪資觀察
從現有資料顯示,全彤盛企業有限公司中較常出現的職位包含傳統機械操作員及電子零件銲接(烙鐵)技術員。其中,傳統機械操作員的月薪大致落在新台幣兩萬六千元左右;而電子零件銲接技術員的月薪則約為新台幣兩萬七千元。這些數字反映了公司對於不同技術層級人員的薪資定位。然而,由於資料涵蓋的時間跨度較長,且職位描述略有差異,因此實際薪資可能因經驗、技能及績效等因素而有所調整。
時間與穩定性觀察
資料顯示,多數薪資紀錄集中在2017年6月至11月間,這表示目前可取得的資訊主要反映該時期的薪資水平。雖然也有部分資料來自更早或更晚的時間區間,但數量相對較少。因此,在解讀這些資料時,需要考慮時間因素可能造成的影響。若求職者希望了解近期的薪資趨勢,建議參考較新的資料來源,以獲得更準確的評估。
資料來源與使用提醒
全彤盛企業股份有限公司的薪資資訊主要來自兩種管道:一是「會員填報後通過 PayLeak 人工徵信(標準提供)」的資料,二是「會員自行填報而未經徵信(簡易提供)」的資料。這兩種資料在來源上存在差異,可能影響資料的完整性與準確性。PayLeak 的徵信過程旨在驗證資料的真實性,但無法保證所有資料皆為絕對正確。此外,文章中提及的 {salary_info_column.trust_vote}、{salary_info_column.doubt_vote}、{salary_info_column.like_vote}、{salary_info_column.hate_vote} 僅為描述性參考指標,不應作為評估資料可信度的依據。
求職者參考角度
本文提供的薪資資訊可作為求職者初步了解全彤盛企業股份有限公司薪資水平的起點。然而,由於資料的限制與主觀性,建議求職者在實際面試時,應主動向公司詢問詳細的職務內容與薪資結構,並結合自身經驗與能力進行評估。此外,亦可參考其他管道的薪資資訊,例如同業公司的薪資水平、人力銀行上的職缺薪資等,以獲得更全面的薪資認知。最終的薪資決定權仍在雇主手中,求職者應以理性態度進行談判,爭取符合自身價值與期望的待遇。
Full Tong Sheng Enterprise Co., Ltd. Salary Overview: Observations on Traditional Machinery Operation and Electronic Welding Positions
Full Tong Sheng Enterprise Co., Ltd., established in 24506795, is one of the industry-known companies. This article aims to compile and analyze salary information provided by job seekers regarding Full Tong Sheng Enterprise Co., Ltd. to serve as a reference for those interested in joining the company. Please note that the data below is not a salary report for a single position but rather a comprehensive observation from various positions and time periods, and is for reference only. Actual salaries depend on individual qualifications and job responsibilities.
Key Positions and Salary Observations
Based on the available data, the positions most frequently appearing at Full Tong Sheng Enterprise Co., Ltd. include traditional machinery operators and electronic parts welding (soldering) technicians. The monthly salary for traditional machinery operators is generally around NT$26,000; while the monthly salary for electronic parts welding technicians is approximately NT$27,000. These figures reflect the company's salary positioning for personnel at different technical levels. However, due to the long time span covered by the data and slight variations in job descriptions, actual salaries may vary based on experience, skills, and performance.
Time and Stability Observations
The data shows that most salary records are concentrated between June and November 2017, indicating that the currently available information primarily reflects the salary levels during that period. Although some data comes from earlier or later time frames, the quantity is relatively small. Therefore, when interpreting this data, the impact of the time factor must be considered. If job seekers wish to understand recent salary trends, it is recommended to refer to newer data sources for a more accurate assessment.
Data Source and Usage Reminder
The salary information for Full Tong Sheng Enterprise Co., Ltd. primarily comes from two channels: first, data obtained after membership reporting and verification by PayLeak manual verification (standard provision), and second, data self-reported by members without verification (simple provision). These two sources differ in origin, which may affect the completeness and accuracy of the data. PayLeak's verification process aims to validate the authenticity of the data but cannot guarantee that all information is absolutely correct. Furthermore, the {salary_info_column.trust_vote}, {salary_info_column.doubt_vote}, {salary_info_column.like_vote}, and {salary_info_column.hate_vote} mentioned in the article are merely descriptive reference indicators and should not be used as a basis for evaluating data credibility.
Job Seeker Perspective
The salary information provided in this article can serve as a starting point for job seekers to preliminarily understand the salary level at Full Tong Sheng Enterprise Co., Ltd. However, due to data limitations and subjectivity, it is recommended that job seekers proactively inquire with the company about detailed job content and salary structure during an actual interview, and evaluate based on their own experience and abilities. Additionally, you can refer to salary information from other channels, such as the salary levels of industry peers or job postings on human resources banks, to gain a more comprehensive understanding of salaries. The final salary decision rests with the employer; job seekers should negotiate rationally to secure compensation that aligns with their value and expectations.
| # | 職位名稱 | 起迄時間 | 月薪 |
|---|
| 1 |
電子零件銲接(烙鐵)技術員 |
2017-09 ~ 2017-11 |
|
| 2 |
傳統機械操作員 |
2017-06 ~ 2017-11 |
|